Geometry PDF

Geometry PDF

Hello friends, Today we are sharing a very important and easy PDF of Geometry. We have also included some of the most important questions related to Geometry PDF in the PDF for your better preparation for all the government exams(U.P.P, UPSI,UPTGT, PGT,UPTET/CTET, HTET, RTET, UDA/LDA, RO/ARO, BEd, LLB, RRB, सचिवालय, अस्सिस्टेंट ग्रेड, ग्राम पंचयत अधिकारी, स्टेनोग्राफर, लेखा परीक्षक, हिनीद अनुवादक परीक्षा, डिप्टी जेलर, बैंक परीक्षा ,एल आई सी, लेखपाल इत्यादि ). If you are preparing for your exams in the last few days then this Geometry is very important for you.

 

 

There are around 20-25 questions in each Government Exams related to Geometry PDF and you can solve 18-20 questions out of them very easily by reading these Notes of Geometry. The complete PDF of Geometry is attached below for your reference, which you can download by clicking at the Download Button.

If you have any doubt or suggestion regarding the PDF then you can tell us in the Comment Section given below, we will be happy to help you. We wish you a better future.

Topics Included in the PDF

  • Introduction
  • lines and angles
  • point
  • planes
  • line
  • collinear points
  • coplanar points
  • Concurrent Lines
  • Parallel Lines
  • Intersecting Lines
  • Line Segment
  • Ray
  • Angle
  • Interior of an angle
  • Congruent Angles
  • The measure of an angle
  • Types of angles
  • Linear Pair of Angles
  • Vertically Opposite Angles
  • Triangle and its Angles
  • Circle




# Topics in the PDF are explained briefly down there:-

Introduction:-In this chapter we will deal with the pure Geometry-related questions. Questions related to the measurement of lengths of lines, areas of surfaces, volumes of solids, etc have been discussed in the chapter ‘Mensuration’.

We shall discuss this chapter under three heads:
1. Lines and Angles
2. Triangle and its Angles
3. Circle

1.Lines and Angles:

  1. Point: Point is a basic concept in Geometry. A point is represented by a fine dot made by a sharp pencil on a sheet of paper.
  2. Plane: The surface of a smooth wall or the surface of a sheet of paper or the surface of a smooth blackboard are examples of a plane
  3. Line: A geometrical straight line is a set of points and extends endlessly in both the directions. To emphasize this point, we use two arrowheads, one at each end.
  4. Collinear and Coplanar: Three or more points are said to be collinear if there is a line which contains all of them.
  5. Concurrent Lines: Three or more lines are said to be concurrent if there is a point which lies on all of them.
  6. Intersecting Lines: Two lines whose intersection is non-empty set are said to be intersecting lines. The common point is called the point of intersection.
  7. Line Segment: Given two points A and B on a line l, the connected part (segment) of the line with endpoints at A and B, is called the line segment AB.
  8. Ray: A ray extends infinitely in one direction from any given point. This is exhibited by an arrow. The starting point, say P, of the ray, is called the initial point.
  9. Interior of an angle: The interior of an angle AOB is the set of all points in its plane which lie on the same side of OA and also on the same side of OB.

2.Triangle and its Angles: A triangle is a closed figure formed by three line segments.

  1. Congruence of two triangles: Two triangles are congruent if and only if one of them can be made to superpose on the others so as to cover it exactly.
  2. The similarity of Triangles: For a given correspondence between two triangles, if the corresponding angles are congruent and their corresponding sides are in proportion, then the two triangles are said to be similar
  3. Side-Angle-Side (SAS) Congruence Criterion: Two triangles are congruent if two sides and
    the included angle of one triangle are equal to the corresponding sides and the included angle of the
    other.
  4. Angle-Side-Angle (ASA) Congruence Criterion: Two triangles are congruent if two angles
    and the included side of one triangle are equal to the corresponding two angles and the included side
    of the other.
  5. Angle-Angle-Side (AAS) Congruence Criterion: If any two angles and a non-included side of
    one triangle are equal to the corresponding angles and side of another, then the two triangles are
    congruent.
  6. Side-Side-Side (SSS) Congruence Criterion: Two triangles are congruent if the three sides
    of one triangle are equal to the corresponding three sides of the other.
  7. Right Angle-Hypotenuse-Side (RHS) Congruence Criterion: Two right triangles are congruent
    if the hypotenuse and one side of one triangle are respectively equal to the hypotenuse and one
    side of the other.





3. Circle: A circle is a closed plane figure consisting of all those points of the plane which are at a constant
distance from a fixed point in the plane

  1. Circular disc: The set of all points lying inside and on the circle is called a circular disc with
    center O and radius r.
  2. Concentric circles: Circles having the same center but with different radii are said to be concentric
    circles.
  3. Arc of a circle: Any two points, say A and B, of a circle, divide the circle into two parts called the
    arcs of the circle. If the two parts are unequal, the smaller part is called the minor arc and the larger
    one is called the major arc.
  4. Semicircle: If any two points A and B divide the circle into two equal parts then each part is
    called a semicircle.
  5. The degree measure of an arc: The degree measure of a minor arc is the measure of the central
    angle containing the arc. And that of a major arc is 360° minus the degree measure of the corresponding
    minor arc.
  6. Secant: A secant is a line, which intersects the circle in two distinct points.
  7. Chord: A line segment joining any two points of a circle is called a chord of the circle.
  8. Diameter (d): A chord passing through the center of a circle is called its diameter. A diameter is
    the longest chord of a circle.
  9. A segment of a circle: Let AB be a chord of the circle. Then AB divides the region enclosed by the
    circle (ie the circular disc) into two parts. Each of these parts is called a segment of the circle.

 

Geometry PDF Download

Book Name: Geometry for SSC Exam
Quality: Excellent
Format: PDF
Size: 957.17 KB
Pages: 62 Page
Language: English




Click here to download: Geometry Pdf Download

 

MyNotesAdda.com will update many more new pdf and study materials and exam updates, keep Visiting and share our post, So more people will get this.

The above PDF is only provided to you by MyNotesAdda.com we are not the makers of the PDF, if you like the PDF or if you have any kind of doubt, suggestion or query regarding the same, feel free to contact us at our Mail id- [email protected] or you can chat with us in the comment section given below.

You can also stay updated by joining us on:

  1. Facebook Page: https://www.facebook.com/mynotesadda/
  2. Facebook Group: https://www.facebook.com/groups/395366674215955/
the data-matched-content-ui-type="image_card_sidebyside">

Comments are closed.

error: Content is protected !!